LoRa and LoRaWAN Solution

LRA-900

RS-232/RS-485 to LoRa Radio Modem

The LRA-900 is a RS-232/RS-485 to radio device designed for remote communication operating in a transparent way and exploiting the physical layer of LoRa (Long Range) transmission technology. The LRA-900 provides a maximum line of sight (LOS) transmission distance of 1500 meters at an RF bit rate less than 10,000 bps. In order to overcome the interference that may be encountered in harsh environments, the LRA-900 allows the RF transmission bit rate to be configured to a minimum of 250 bps, enhancing the capability of the modem to resist noise and other interference. Additionally, the RF channels and Group IDs are adjustable, which is helpful to avoid interference encountered when two LRA-900 networks are adjacent. The RF channels and the Group IDs can be confi gured in order to distinguish and control the different LRA-900 networks.

Application

LRA-900-E

Ethernet to LoRa Radio Modem

The LRA-900-E is a Ethernet to radio device designed for remote communication operating in a transparent way and exploiting the physical layer of LoRa (Long Range) transmission technology. By using the VxComm Driver/Utility, the built-in RF port of the LRA-900-E can be virtualized to a standard PC COM Port in Windows. Therefore, users can transparently access RF datas over the Internet/Ethernet via COM Port program. The LRA-900-E provides a maximum line of sight (LOS) transmission distance of 1500 meters at an RF bit rate 10,000 bps. In order to overcome the interference that may be encountered in harsh environments, the LRA-900-E allows the RF transmission bit rate to be confi gured to a minimum of 250 bps, enhancing the capability of the modem to resist noise and other interference.

Application

NTS-201-S

Lora To RS-232/422/485 Interface Converter

CPU : 32 bits MCU ,40 MHz , 16KB SRAM, 128KB Flash ROM

Support Modbus & Transparent

LoRa : Semtech SX1272

• Freq. : ISM band 862 ~ 936MHz
• Receiver Sensitivity : -137 dBm
• Transmit Output Power : 20 dBm
• Sleep Current : 3uA (at power down state)
• TX current < 140 mA@20 dbm , RX current < 10 mA
• Security processor ( 128/192/256 bits AES )
• Packet engine up to 256 bytes with CRC
• Antenna : SMA Type, 2 dBi, changeable
• Distance : Up To 5000 Meters in free space
• Data Rate : 0.244 ~ 18.2K bps (LoRa) / 300 K bps (FSK)
• Application mode : Star

Serial Port

• No.of Port : RS-232/422/485 * 1 port ( auto Detect )
• RS-232 : Rx , Tx , GND , RTS , CTS ( DB9 female )
• RS-422 : Tx+ , Tx-, Rx+ , Rx- (Surge Protect )
• RS-485 : Data+ , Data- (Surge Protect)
• Built –in RS-422/RS-485 Terminal Resistor
• Speed : 9600 bps〜115.2K bps
• Parity : None, Odd, Even
• Data Bit : 7, 8 / Stop Bit : 1 , 2

• Setup Tool : Windows Utility

• Power : DC 9 ~ 24V / 150ma @ 9V , 60ma @ 24V

• Led Lamp : SYS (green) , Rx(red) , Tx(green)

• Environment: Operating Temperature: -10℃〜70℃ Storage Temperature: -20℃〜80℃

• Dimensions : 100 * 90 * 25 mm ( W * D * H )

• Weight : 150 gm ( not include power )

Application

NTS-201-E

1) NTS-201-E- Ethernet TCP To LoRa
2) NTS-201-E-Modbus- ModbusTCP To LoRa

Ethernet (Modbus) TCP To LoRa Interface Converter

NTS-201-E-Modbus : Ethernet Modbus TCP to LoRa

CPU : 32 bits MCU ,40 MHz , 16KB SRAM, 128KB Flash ROM

Support Modbus or Transparent (to be assigned on quote and order)

LoRa : Semtech SX1272

• Freq. : ISM band 862 ~ 936MHz
• Receiver Sensitivity : -137 dBm
• Transmit Output Power : 20 dBm
• Sleep Current : 3uA (at power down state)
• TX current < 140 mA@20 dbm , RX current < 10 mA
• Security processor ( 128/192/256 bits AES )
• Packet engine up to 256 bytes with CRC
• Antenna : SMA Type , 2 dBi , changeable
• Distance : Up To 1500~7500 Meters in free space
• Data Rate : 0.244 ~ 18.2K bps (LoRa) / 300 K bps (FSK) - Application mode : Star

Serial Port

• Port Type: RJ-45 Connector
• Speed: 10 / 100 Mbps ( Auto Detect )
• Protocol: ARP , IP , ICMP , UDP , TCP , HTTP , DHCP
• Mode: TCP Server / TCP Client / UDP / Virtual Com / Pairing
• Setup: HTTP Browser Setup ( IE )
• Security: Login Password
• Protection: Built-in 1.5KV Magnetic Isolation
• Modbus TCP To RTU Slave & Modbus TCP To ASCII Slave Mode
• Modbus RTU To TCP Slave & Modbus ASCII To TCP Slave Mode

• Setup Tool : Windows Utility

• Power : DC 9 ~ 24V / 150mA@ 9V , 60mA@ 24V

• Led Lamp : SYS (green) , Rx(red) , Tx(green)

• Environment: Operating Temperature: -10℃〜70℃ Storage Temperature: -20℃〜80℃

• Dimensions : 100 * 90 * 25 mm ( W * D * H )

• Weight : 150 gm ( not include power )

Application

NT-201-S-WAN

RS232/422/485 To LoRaWAN

Features : Auto polling Modbus RTU device Data

CPU : Xtensa@ 32-bit LX6 microprocessors 160M Hz

RAM : 400K Bytes SRAM; ROM : 380K Bytes Flash ROM

Suport : LoRsWAN 1.0.2

LoRa : Semtech SX1262

• Freq. : ISM band 863 ~ 928MHz
• Receiver Sensitivity : -139 dBm
• Transmit Output Power : 22 dBm
• Deep Sleep Current : 10 uA
• TX current < 140 mA@20 dbm , RX current < 10 mA
• Security processor ( 128/192/256 bits AES )
• Packet engine up to 256 bytes with CRC
• Antenna : SMA Type, 2 dBi, changeable
• Distance : Up To 1500 Meters in free space
• Data Rate : 0.244 ~ 18.2K bps(LoRa)
• Application mode: Star

• Setup Tool : Windows Utility

• Power : DC 9 ~ 24V / 150mA@ 9V , 60mA@ 24V

• Led Lamp : SYS (green) , Rx(red) , Tx(green)

• Environment: Operating Temperature: -10℃〜70℃ Storage Temperature: -20℃〜80℃

• Dimensions : 100 * 90 * 25 mm ( W * D * H )

• Weight : 150 gm ( not include power )

Application

NT-201-AI-WAN

Analog Input To LoRaWAN

NT-201-AI-WAN : Analog Input To LoRaWAN

Features : Auto polling AnalogInput Sensor Data To LoRAWAN

CPU : Xtensa@32-bit LX6 microprocessors 160M HX

RAM :400K Bytes SRAM; ROM : 380K Bytes Flash ROM

Support : LoRaWAN 1.0.2

Application

NT-201-DIO-WAN

LoRaWAN Digital I/O Controller

NT-201-DIO-WAN : LoRaWAN Digital I/O Controller

CPU : 32 bits MCU, 160 MHZ, 400KB SRAM, 380KB Flash ROM

Support : LoRaWAN 1.0.2col

LoRa : Semtech SX1262

• Freq. : ISM band 8632 ~ 928MHz
• Receiver Sensitivity : -139 dBm
• Transmit Output Power : 22 dBm
• Deep Sleep Current : 10 uA
• TX current < 140 mA@20 dbm , RX current < 10 mA
• Antenna : SMA Type , 2 dBi , changeable
• Distance : Up To 1500 Meters in free space
• Data Rate : 0.244 ~ 18.2K bps (LoRa) / 300 K bps (FSK)
• Application mode : Star

• Setup Tool : Windows Utility

• Power : DC 9 ~ 24V / 150mA@ 9V , 60mA@ 24V

• Led Lamp : SYS (green) , Rx(red) , Tx(green)

• Environment: Operating Temperature: -10℃〜70℃ Storage Temperature: -20℃〜85℃

• Dimensions : 100 * 90 * 25 mm ( W * D * H )

• Weight : 150 gm ( not include power )

Application

NT-201-G-WAN

LoRaWAN Gateway

LoRaWAN Gateway

Features

• Built-in Media Tek smart 7688
• Open Source OpenWRT system
• Multi-Channels LoRaWAN gateway
• Support LoRaWAN station connection
• Supports Semtech Standard Packet Forwarder
• Managed and Configured by Web UI

Application

NT-201-G-WAN-Server

LoRaWAN Gateway + Network Server

LoRaWAN Gateway

Features

• LoRAWAN Gateway+Server Lite (All in one)
• Open Source OpenWRT system
• 8 LoRAWAN Channels gateway
• Supports Semtech Standard Packet Forwarder
• Managed and Configured by Web UI
• Support MQTT function
• SD card for log backup (For furture use)

Application

NT-201-AO-2-WAN

LoRaWAN to Analog Output

Features

• Downlink Control Analog output to LoRaWAN Node
• Windows Configuration Utility
• Support LaRaWAN 1.0.2
• 2 Channels Analog outputs
• High-gain Directional Antenna (9 dBi) (optinal)

Application

NT-201-AI8-2DI-WAN

LoRaWAN To Analog Input + Digital Input

LoRaWAN to Analog Output + Digital Input

Features

• Auto polling Analog Input Data to LoRaWAN Server
• Windows Configuration Utility
• Support LoRAWAN 1.0.2
• Support Modbus RTU protocol
• 8 Channels Analog Inputs + 2 Channels Digital Inputs
• High-gain Directional Antenna (9dBi) (optional)

Application

NT-201-AI8-2DO-WAN

LoRaWAN To Analog Input + Digital Input + Digital Output

LoRaWAN to Analog Output + Digital Input

Features

• Auto polling Analog Input Data to LoRaWAN Server
• Windows Configuration Utility
• Support LoRAWAN 1.0.2
• Support Modbus RTU protocol
• 8 Channels Analog Inputs + 2 Channels Digital Outputs
• High-gain Directional Antenna (9dBi) (optional)

Application

R1520LG

Industrial LoRaWAN Gateway Low Power Consumption & Long Range Communication 2 x Ethernet, 1 x RS232 + RS485, POE-PD, WiFi

KEY FEATURES

• Supports PoE-PD for optimal location of gateway
• WiFi client and AP Supported
• Wide 9 to 60VDC power input
• Dual Ethernet ports providing WAN & LAN connections
• Dual SIM slots for resilient cellular communications
• RS232 & RS485 for peripheral connection
• Supported by "Operations Console" - Robustel's unique Gateway management environment
• RobustVPN provides easy remote access to all Gateways no matter what SIM/internet connection type is used
• "E2C Chirpstack" provides a simple connector for LoRa data – directly into AWS/Azure or other cloud platforms

Application

R3000LG

Industrial LoRaWAN Gateway Low Power Consumption & Long Range Communication

KEY FEATURES

• Supports global LoRaWAN frequency bands
• Compatible with LoRaWAN and private protocols
• Compatible with any LoRaWAN cloud server
• Up to 8 channels supports receive data simultaneously
• Supports Packet Forwarder Version 2.2.1 and Packet Forwarder Protocol Version 1
• RobustOS + SDK
• TPH6700 Housing optional
• Backhaul option supports 3G, 4G and Ethernet
• Supports dual SIM
• Robust industrial design (9 ~ 60 VDC, -40 ~ +75 °C)

Application